Check out our New Publishers' Select for Free Articles

Applied Microbiology and Biotechnology (v.52, #4)

Pharmaceutically active secondary metabolites of microorganisms by A. L. Demain (pp. 455-463).

The antibiotics have been useful in our battles against infectious bacteria and fungi for over 50 years. However, many antibiotics are used commercially, or are potentially useful, in medicine for activities other than their antibiotic action. They are used as antitumor agents, immunosuppressive agents, hypocholesterolemic agents, enzyme inhibitors, antimigraine agents, and antiparasitic agents. A number of these products were first discovered as antibiotics which failed in their development as such, or as mycotoxins. In addition to the above alternative applications, new powerful antibiotics have been discovered and commercialized in recent years and others are in clinical testing at the moment. A few successful secondary metabolites appear to have no antibiotic activity. The recently increased development of resistance to older antibacterial and antifungal drugs is being met with the use or clinical testing of older, underutilized or previously nondeveloped narrow-spectrum antibacterial products as well as powerful semisynthetic antifungal agents.

Bacterial magnetosomes: microbiology, biomineralization and biotechnological applications by D. Schüler; R. B. Frankel (pp. 464-473).

Magnetotactic bacteria orient and migrate along geomagnetic field lines. This ability is based on intracellular magnetic structures, the magnetosomes, which comprise nanometer-sized, membrane-bound crystals of the magnetic iron minerals magnetite (Fe₃O₄) or greigite (Fe₃S₄). Magnetosome formation is achieved by a mineralization process with biological control over the accumulation of iron and the deposition of the mineral particle with specific size and orientation within a membrane vesicle at specific locations in the cell. This review focuses on the current knowledge about magnetotactic bacteria and will outline aspects of the physiology and molecular biology of the biomineralization process. Potential biotechnological applications of magnetotactic bacteria and their magnetosomes as well as perspectives for further research are discussed.

Advances in genetic analysis and biotechnology of the cultivated button mushroom, Agaricus bisporus by J. M. H. Stoop; H. Mooibroek (pp. 474-483).

During the last decade several major breakthroughs have been achieved in mushroom biotechnology, which greatly enhanced classical mushroom breeding. DNA-based technologies such as restriction fragment length polymorphisms and randomly amplified polydisperse DNA sequences have allowed for a measure of genetic diversity, for the isolation of homokaryons, for the determination of inheritance of nuclear and mitochondrial markers, and for the production of a genetic linkage map. The recent availability of ready-to-use and affordable DNA technologies has resulted in a substantial increase in the number of Agaricus bisporus genes that have been identified and characterized. A major breakthrough was achieved in 1996 when the first successful and stable transformation system of A. bisporus was reported. Together, the availability of an increasing number of known genes and the possibility to produce transgenic mushrooms will result in a better understanding of the molecular, physiological and biochemical processes that are essential for mushroom production, shelf life and quality aspects such as flavor, texture and disease resistance. Some potential targets for strain improvement are discussed, such as the genes involved in brown discoloration, substrate utilization, carbon and nitrogen metabolism, and fruit body development.

Stimulatory effect of growth in the presence of alcohols on biotransformation of penicillin G into cephalosporin-type antibiotics by resting cells of Streptomyces clavuligerus NP1 by M.-J. Fernández; J. L. Adrio; J. M. Piret; S. Wolfe; S. Ro; A. L. Demain (pp. 484-488).

Growth of Streptomyces clavuligerus NP1 in the presence of methanol or ethanol resulted in a marked increase in production of cephalosporin(s) from penicillin G by resting cells. The mycelium produced in alcohol-supplemented medium was fragmented and dispersed as compared with growth in control medium. HPLC analysis showed that at least two products were present in the biotransformation supernatant fluid after 1 h incubation. One of them has been identified as deacetoxycephalosporin G (DAOG).

Fluorescence monitoring during cultivation of Enterobacter aerogenes at different oxygen levels by J. Mukherjee; C. Lindemann; T. Scheper (pp. 489-494).

On-line monitoring of NAD(P)H fluorescence and 2D fluorescence spectroscopy was performed with Enterobacter aerogenes, a bacterium sensitive to oxygen availability. The organism was grown in a reactor under low and high dissolved oxygen concentrations and circulated through a bypass attached to the reactor. Under low dissolved oxygen concentration in the reactor, NAD(P)H fluorescence in the reactor and the bypass showed a deviation, but not when the dissolved oxygen level in the reactor was high. The pattern of growth curves was identical under low and high oxygen levels. This indicates a difference in the metabolic activity of E. aerogenes in response to oxygen. The difference spectrum of the 2D fluorescence shows that growing E. aerogenes under high dissolved oxygen levels increases the NAD(P)H content of the cells.

Production of sophorolipids from whey by R. T. Otto; H.-J. Daniel; G. Pekin; K. Müller-Decker; G. Fürstenberger; M. Reuss; C. Syldatk (pp. 495-501).

Sophorolipids, obtained by a two-stage process starting from deproteinized whey concentrate using Cryptococcus curvatus ATCC 20509 and Candida bombicola ATCC 22214, were compared to products from one-stage processes, using different lipidic compounds as substrates. Results showed that above all carbon source and not cultivation conditions had a distinct influence on the composition of the crude product mixture and therefore on the physicochemical and biological properties of the sophorolipids, such as, for example, surface activity, cytotoxicity and stability against hydrolases. The results were completed by corresponding data for purified mono- and diacetylated (17-hydroxyoctadecenoic)-1′,4′′-lactonized sophorolipids. Crude sophorolipid mixtures showed moderate to good surface active properties (SFT^min 39 mN m⁻¹, CMC 130 mg l⁻¹), water solubilities (2–3 g l⁻¹) and low cytotoxicities (LC₅₀ 300–700 mg l⁻¹). In contrast, purified sophorolipids were more surface active (SFT^min 36 mN m⁻¹, CMC 10 mg l⁻¹), less water soluble (max. 70 mg l⁻¹) and showed stronger cytotoxic effects (LC₅₀ 15 mg l⁻¹). Incubation of crude sophorolipid mixtures with different hydrolases demonstrated that treatment with commercially available lipases such as from Candida rugosa and Mucor miehei distinctly reduced the surface active properties of the sophorolipids, while treatment with porcine liver esterase and glycosidases had no effect.

Monitoring of low concentrations of glucose in fermentation broth by M. P. Nandakumar; A. Sapre; A. Lali; B. Mattiasson (pp. 502-507).

A highly sensitive glucose sensor, operating in flow-injection analysis (FIA) mode, was developed for the detection of glucose in fermentation broth. The assay system is based upon the post-column reaction of the peroxide formed in the glucose-oxidase-catalysed reaction and subsequent spectrophotometric detection of the coloured product formed. The sensor system was characterised and calibrated using standard solutions, and later used for quantification of glucose in fermentation media. Two types of enzyme column were used: one operated in packed-bed mode and the other in expanded- bed mode. Both columns were integrated into a FIA system and were found to give good analytical results. Glucose concentrations as low as 0.1 mg/l and 5 mg/l could be detected in packed- and expanded-bed modes respectively. Glucose concentrations were measured during typical fed-batch fermentation conditions in this system, and the results are presented.

Establishment of a gene transfer system for Rhodococcus opacus PD630 based on electroporation and its application for recombinant biosynthesis of poly(3-hydroxyalkanoic acids) by R. Kalscheuer; M. Arenskötter; A. Steinbüchel (pp. 508-515).

A gene transfer system for Rhodococcus opacus PD630 based on electroporation was established and optimized employing the Escherichia coli-Rhodococcus shuttle vectors pNC9501 and pNC9503 as well as the E. coli-Corynebacterium glutamicum shuttle vector pJC1 as suitable cloning vectors for R. opacus PD630, resulting in transformation efficiencies up to 1.5 × 10⁵ CFUs/μg plasmid DNA. Applying the optimized electroporation protocol to the pNC9501-derivatives pAK68 and pAK71 harboring the entire PHB synthesis operon from Ralstonia eutropha and the PHA synthase gene phaC1 from Pseudomonas aeruginosa, respectively, recombinant PHA biosynthesis was established in R. opacus PD630 and the TAG-negative mutant ROM34. Plasmid pAK68 enabled synthesis and accumulation of poly(3HB) in R. opacus PD630 and ROM34 during cultivation under storage conditions from 1% (w/v) gluconate, of poly(3HB-co-3HV) from 0.2% (w/v) propionate and of poly(3HV) from 0.1% (w/v) valerate. Under storage conditions, recombinant strains of PD630 and ROM34 harboring pAK71 were able to synthesize and accumulate PHA of the medium chain length hydroxyalkanoic acids 3HHx, 3HO, 3HD and 3HDD from 0.1% (w/v) hexadecane or octadecane and a copolyester composed of 3HHp, 3HN and 3HUD from 0.1% (w/v) pentadecane or heptadecane. In the recombinant strains of PD630 and ROM34, the thiostrepton-induced overexpression of a 20 kDa protein was observed with its N-terminus exhibiting a homology of 60% identical amino acids to TipA from Streptomyces lividans.

Production of functional human α₁-antitrypsin by plant cell culture by M. Terashima; Y. Murai; M. Kawamura; S. Nakanishi; T. Stoltz; L. Chen; W. Drohan; R. L. Rodriguez; S. Katoh (pp. 516-523).

Recombinant human α₁-antitrypsin (rAAT) was expressed and secreted from transgenic rice cell suspension cultures in its biologically active form. This was accomplished by transforming rice callus tissues with an expression vector, p3D-AAT, containing the cDNA for mature human AAT protein. Regulated expression and secretion of rAAT from this vector was achieved using the promoter, signal peptide, and terminator from a rice α-amylase gene Amy3D. The Amy3D gene of rice is tightly controlled by simple sugars such as sucrose. It was possible, therefore, to induce the expression of the rAAT by removing sucrose from the cultured media or by allowing the rice suspension cells to deplete sucrose catabolically. Although transgenic rice cell produced a heterogeneous population of the rAAT molecules, they had the same N-terminal amino acids as those found in serum-derived (native) AAT from humans. This result indicates that the rice signal peptidase recognizes and cleaves the novel sequence between the Amy3D signal peptide and the first amino acid of the mature human AAT. The highest molecular weight band seen on Western blots (AAT top band) was found to have the correct C-terminal amino acid sequence and normal elastase binding activity. Staining with biotin-concanavalin A and avidin horseradish peroxidase confirmed the glycosylation of the rAAT, albeit to a lesser extent than that observed with native AAT. The rAAT, purified by immunoaffinity chromatography, had the same association rate constant for porcine pancreatic elastase as the native AAT. Thermostability studies revealed that the rAAT and native AAT decayed at the same rate, suggesting that the rAAT is correctly folded. The productivity of rice suspension cells expressing rAAT was 4.6–5.7 mg/g dry cell. Taken together, these results support the use of rice cell culture as a promising new expression system for production of biologically active recombinant proteins.

Recombinant protein composed of Pseudomonas exotoxin A, outer membrane proteins I and F as vaccine against P. aeruginosa infection by T.-Y. Chen; H.-F. Shang; T.-L. Chen; C.-P. Lin; C.-F. Hui; J. Hwang (pp. 524-533).

We have constructed a chimeric protein composed of the receptor binding and membrane translocation domains of Pseudomonas exotoxin A (PE) with the outer membrane proteins I and F, together designated as PEIF. The potential of PEIF as a vaccine against Pseudomonas infection was evaluated in BALB/c mice and New Zealand white rabbits. We examined titers of anti-PE and anti-OprF antibodies, and the ability both to neutralize PE cytotoxicity and to increase opsonophagocytic uptake of Pseudomonas aeruginosa strain PAO1, serogroups 2 and 6. The results showed that PEIF can induce antibodies not only to neutralize the PE cytotoxicity but also to promote the uptake of various strains of P. aeruginosa by murine peritoneal macrophages. In a burned mouse model, PEIF afforded significant protection against infection by the homologous P. aeruginosa strain PAO1, heterologous serogroup 2, and the PE hyperproducing strain PA103. These observations thus indicate that PEIF may be used as a novel vaccine against P. aeruginosa infection.

Independent production of two molecular forms of a recombinant Rhizopus oryzae lipase by KEX2-engineered strains of Saccharomyces cerevisiae by S. Takahashi; M. Ueda; A. Tanaka (pp. 534-540).

A mixture of rProROL having the full-length prosequence (97 amino acids) for a recombinant lipase of Rhizopus oryzae (rROL) and r28ROL having 28 amino acids of the same prosequence has been produced as active forms by Saccharomyces cerevisiae [Takahashi et al. (1998) J Ferment Bioeng 86: 164–168]. However, the separation of rProROL and r28ROL has not been successful due to their identical behavior on column chromatographs, presumably because of the similarity of their surface properties. The independent production of two different molecular forms of rROL was carried out using KEX2-engineered strains of S. cerevisiae, since r28ROL was predicted to be a product from rProROL by a Kex2-like protease. rProROL was successfully obtained by expression of the ROL gene in the S. cerevisiae kex2 strain in which the KEX2 gene encoding Kex2p was disrupted, while r28ROL was obtained by co-expression of the gene (KEX2Δ613) encoding the soluble form of the C-terminal truncated Kex2 protease (sKex2p). The specific lipase activities of rProROL and r28ROL were 92.9 U/mg and 140 U/mg, respectively. rProROL was stable at pH 2.2–8.0, and showed the optimal reaction temperature to be 30–35 °C with a T ₅₀ of 55 °C (T ₅₀ is the temperature resulting in 50% loss of activity). The values for r28ROL were pH 3.0–10.0, 25–30 °C, and 40 °C, respectively. rProROL was an N-linked glycosylated form, but r28ROL was not. The enhanced thermostability of rProROL did not seem to be due to the N-linked glycosylation, as judged by the results of the Endo H treatment. rProROL had the highest esterase activity toward p-nitrophenyl laurate (C₁₂), whereas r28ROL had the highest esterase activity toward p-nitrophenyl caprylate (C₈) and stearate (C₁₈). These results suggest that the distinct properties of these two forms of lipase are caused by the different length of the ROL prosequence.

A heat shock following electroporation induces highly efficient transformation of Corynebacterium glutamicum with xenogeneic plasmid DNA by M. E. van der Rest; C. Lange; D. Molenaar (pp. 541-545).

An improved method for the electrotransformation of wild-type Corynebacterium glutamicum (ATCC 13032) is described. The two crucial alterations to previously developed methods are: cultivation of cells used for electrotransformation at 18 °C instead of 30 °C, and application of a heat shock immediately following electrotransformation. Cells cultivated at sub optimal temperature have a 100-fold improved transformation efficiency (10⁸ cfu μg⁻¹) for syngeneic DNA (DNA isolated from the same species). A heat shock applied to these cells following electroporation improved the transformation efficiency for xenogeneic DNA (DNA isolated from a different species). In combination, low cultivation temperature and heat shock act synergistically and increased the transformation efficiency by four orders of magnitude to 2.5 × 10⁶ cfu μg⁻¹ xenogeneic DNA. The method was used to generate gene disruptions in C. glutamicum.

Physiology and kinetics of trimethylamine conversion by two methylotrophic strains in continuous cultivation systems by J. Carlos Roseiro; P. J. Partidário; N. Lobo; M. J. Marçal (pp. 546-552).

The change of dilution rate (D) on both Methylophilus methylotrophus NCIMB11348 and Methylobacterium sp. RXM CCMI908 growing in trimethylamine (TMA) chemostat cultures was studied in order to assess their ability to remove odours in fish processing plants. M. methylotrophus NCIMB11348 was grown at dilution rates of 0.012–0.084 h⁻¹ and the biomass level slightly increased up to values of D around 0.07 h⁻¹. The maximum cell production rate was obtained at 0.07 h⁻¹ corresponding to a maximum conversion of carbon into cell mass (35%). The highest rate of TMA consumption was 3.04 mM h⁻¹ occurring at D=0.076 h⁻¹. Methylobacterium sp. RXM CCMI908 was grown under similar conditions. The biomass increased in a more steep manner up to values of D around 0.06 h⁻¹. The maximum cell production rate (0.058 g l⁻¹h⁻¹) was obtained in the region close to 0.06 h⁻¹ where a maximum conversion of the carbon into cell mass (40%) was observed. The maximum TMA consumption was 2.33 mM h⁻¹ at D=0.075 h⁻¹. The flux of carbon from TMA towards cell synthesis and carbon dioxide in both strains indicates that the cell is not excreting products but directing most of the carbon source to growth. Carbon recovery levels of approximately 100% show that the cultures are carbon-limited. Values for theoretical maximum yields and maintenance coefficients are presented along with a kinetic assessment based on the determination of the substrate saturation constant and maximum growth rate for each organism.

Biotransformation of N-acetylphenothiazine by fungi by I. A. Parshikov; J. P. Freeman; A. J. Williams; J. D. Moody; J. B. Sutherland (pp. 553-557).

Cultures of the fungi Aspergillus niger, Cunninghamella verticillata, and Penicillium simplicissimum, grown in a sucrose/peptone medium, transformed N-acetylphenothiazine to N-acetylphenothiazine sulfoxide (from 13% to 28% of the total) and phenothiazine sulfoxide (from 5% to 27%). Phenothiazin-3-one (4%) and phenothiazine N-glucoside (4%) were also produced by C. verticillata. The probable intermediate, phenothiazine, was detected only in cultures of P. simplicissimum (6%).

Screening of spontaneous and induced mutants in Streptomyces avermitilis enhances avermectin production by M. Aikawa; S. A. R. Lopes-Shikida; M. F. Lemos; J. G. C. Pradella; G. Padilla (pp. 558-562).

Because of the loss of productivity in industrial strains (as a consequence of genetic instability), the selection of spontaneous and induced mutants in Streptomyces might generate enhanced producers of bioactive compounds. In this work, a spontaneously high producing mutant of Streptomyces avermitilis, strain 267/2H, was isolated. This mutant produced 8.2 times more avermectin B₁ than the wild type and it was treated with methyl methanesulphonate (MMS) in order to obtain better avermectin producers. One mutant, strain IPT-85, produced about 16 times more avermectin than the wild-type strain ATCC 31267 and twice as much as the parental strain 267/2H. Reversion studies showed that avermectin production by the IPT-85 mutant was unstable and required constant selection to maintain high levels of avermectin B₁ production. Upon a second MMS treatment of IPT-85, a new avermectin-aglycone-producing mutant, strain IPT 85-62, was isolated.

The effect of cell wall components on glycine-enhanced sterol side chain degradation to androstene derivatives by mycobacteria by L. Sedlaczek; K. Lisowska; M. Korycka; A. Rumijowska; A. Ziółkowski; J. Długoński (pp. 563-571).

β-Sitosterol side chain degradation by Mycobacterium sp. NRRL MB 3683 results in the formation of androstene derivatives and is increased in the presence of glycine. As the sterol transformation is carried out inside the cell, higher product accumulation could indicate faster diffusion of highly hydrophobic substrate through the cell wall permeability barrier. Cell wall preparations were obtained to analyse the effect of glycine on peptidoglycan components. Peptidoglycan is known to be the target for glycine action. In glycine-treated preparations, the molar ratio of diaminopimelic acid:muramic acid, the marker compounds of tetrapeptides and glycan strands respectively, was about 60% lower than in the control. This indicates a possible reduction in cross-linking between peptide units and the destruction of peptidoglycan. Unexpectedly, glycine also caused changes in the relative proportion of mycolic acids to other lipids occurring in the strain used for this study. The enhancement of β-sitosterol side chain degradation is likely to result from disturbing the integrity of the cell wall components responsible for the permeability barrier in mycobacteria.

Glucose repression of anthracycline formation in Streptomyces peucetius var. caesius by L. Escalante; I. Ramos; I. Imriskova; E. Langley; S. Sanchez (pp. 572-578).

The effect of glucose on growth and anthracycline production by Streptomyces peucetius var. caesius was examined in a chemically defined medium. Glucose concentrations above 100 mM inhibited anthracycline synthesis in the original strain without causing significant change in growth and final pH values. This effect was observed when the carbohydrate was added initially or after 24 h fermentation, but not when added during the stationary growth phase. When the microorganism was pregrown in 100 mM glucose and then transferred to a resting cell system with 444 mM glucose, no significant differences in antibiotic production were observed compared to the control without glucose. The negative effect of glucose on antibiotic synthesis was not observed in a mutant (2-dog^R–21) resistant to growth inhibition by 2-deoxyglucose. Glucose consumption by this mutant was approximately 30% of that utilized by the original strain. Compared to the original strain, the mutant 2-dog^R–21 exhibited a reduction of 50% in glucose transport and an 85% decrease in glucose kinase activity. The experimental evidence obtained suggests that glucose represses anthracycline formation in a transitory manner and that this effect is related to glucose transport and phosphorylation.

Preparation of stearoyl lactic acid ester catalyzed by lipases from Rhizomucor miehei and porcine pancreas optimization using response surface methodology by K. R. Kiran; N. G. Karanth; S. Divakar (pp. 579-584).

The esterification reaction between stearic acid and lactic acid using Rhizomucor miehei lipase and porcine pancreas lipase was optimized for maximum esterification using response surface methodology. The formation of the ester was found to depend on three parameters namely enzyme/substrate ratio, lactic acid (stearic acid) concentration and incubation period. The maximum esterification predicted by theoretical equations for both lipases matched well with the observed experimental values. In the case of R. miehei lipase, stearoyl lactic acid ester formation was found to increase with incubation period and lactic acid (stearic acid) concentrations with maximum esterification of 26.9% at an enzyme/substrate (E/S) ratio of 125 g mol⁻¹. In the case of porcine pancreas lipase, esterification showed a steady increase with increase in incubation period and lactic acid (stearic acid) concentration independent of the E/S ratios employed. In the case of PPL, a maximum esterification of 18.9% was observed at an E/S ratio of 25 g mol⁻¹ at a lactic acid (stearic acid) concentration of 0.09 M after an incubation period of 72 h.

Colour and AOX removal from pulping effluents by algae by F. B. Dilek; H. M. Taplamacioglu; E. Tarlan (pp. 585-591).

A mixed culture of algae was used to treat pulping mill effluent in terms of removing both colour and adsorbably organic halides (AOX). The removal of AOX from pulping effluent increased with increasing initial colour value of the effluent. However, for the total mill effluent (composed of both pulping and bleaching effluents), AOX removal was found to be independent of initial colour value, and was around 70%. Up to 80% removal of colour from pulping effluent was achieved within 30 days under continuous lighting conditions. It was found that algae reduced the colour of pulping effluent of relatively low initial colour more efficiently than that of high initial colour. Under simulated field lighting conditions, up to 60% colour removal from pulping effluent was observed after 60 days of exposure, whereas for the total mill effluent it was up to 64% after 45 days. Total organic carbon and lignin (UVA₂₈₀) were also removed to a significant extent, suggesting that the mechanism of colour removal might not be transformation of the coloured lignin molecules to non-coloured ones. Analysis of alkaline extraction of the algal biomass and material balance findings indicated that the main colour removal mechanism was metabolism rather than adsorption. The experimental results were also analysed using multiple regression techniques and a mathematical model was developed to express the removal of colour from pulping effluents in terms of initial colour value, exposure time and lighting periods as well as interactions between these variables.

High efficiency of a coupled aerobic-anaerobic recycling biofilm reactor system in the degradation of recalcitrant chloroaromatic xenobiotic compounds by M. A. Ascón; J.-M. Lebeault (pp. 592-599).

Chloroaromatic compounds are xenobiotics that cause great concern. The degradation of a model molecule, 3,4-dichlorobenzoate (3,4-DCB), was studied using three aerobic (AE)-anaerobic (AN) biofilm reactor systems: a coupled aerobic-anaerobic recycle biofilm reactor (CAR) system, an in-series anaerobic-aerobic biofilm reactor (SAR) system; and an independent aerobic and anaerobic biofilm reactor (IAR) system. In all three systems the inlet substrate concentration was 2.0 g/l and the dilution rates ranged from 0.045 to 0.142 per hour. The results show that the degradation efficiency of the CAR system (expressed as dechlorination and xenobiotic disappearance efficiencies, and biomass yield), was higher at all dilution rates tested than in both SAR and IAR systems. Moreover, dechlorination and xenobiotic disappearance efficiencies for resting suspended aerobic and anaerobic cells or mixed aerobic-anaerobic growing cells under anaerobic conditions were higher than under aerobic conditions. These results suggest that a “cooperative metabolism” between aerobic and anaerobic bacteria (caused by an exchange of cells and metabolites between AE and AN reactors) in the CAR system overcame the metabolic and kinetic limitations of aerobic and anaerobic bacteria in the AE and AN reactors of IAR and SAR systems. Therefore, the degradation efficiency of persistent and recalcitrant chloroaromatic xenobiotic compounds could be enhanced by using a CAR system.

Fast remediation of coal-tar-related compounds in biofilm bioreactors by B. Guieysse; B. Mattiasson (pp. 600-607).

The biological degradation of complex mixtures of recalcitrant substances is still a major challenge in environmental biotechnology and the remediation of coal-tar constitutes one such problem area. Biofilm bioreactors offer many advantages and may be successfully used for this purpose. Two stirred-tank reactors and one packed-bed reactor were tested in a continuous mode. Continuous cultivation allows microbial selection to take place whilst adhesive growth provides a high degradation capacity and process stability. The reactors were inoculated with mixed microbial populations to favour complete metabolism and to prevent metabolite accumulation and substrate inhibition effects. Phenol, o-cresol, quinoline, dibenzofuran, acenaphthene and phenanthrene were used as model contaminants and constituted the sole energy and carbon sources. The hydraulic retention time (HRT) was initially set to 2.5 days for a period of several months to allow the establishment of a stable biofilm and was then gradually decreased. All the compounds were found to be degraded by more than 90% at HRT of 3 h or more. Neither substrate inhibition nor metabolite accumulation effects were observed. The stirred-tank configuration was found to be the most efficient for use with high loads. No improvement in the degradation capacity could be achieved by increasing the biofilm surface in these reactors, illustrating that the limiting factor may be the mass transfer limitations rather than the availability of the biofilm surface. Finally, anaerobic treatment was successfully achieved, confirming the potential for remediation of contaminated sites under anaerobic conditions, providing that alternative electron acceptors are present.

Fixation of spent Saccharomyces cerevisiae biomass for lead sorption by R. Ashkenazy; S. Yannai; R. Rahman; E. Rabinovitz; L. Gottlieb (pp. 608-611).

Spent Saccharomyces cerevisiae cells from a beer fermentation process were evaluated for lead cation sorption. The crude biomass was washed with water and acetone prior to any other treatment. Although the washed biomass showed substantial lead ion sorption it was susceptible to microbial spoilage. Different aldehydes were tested as chemical fixation agents; however, most of them caused drastic lowering of the metal uptake capacity. However, benzaldehyde was not only an excellent fixation agent, but the biomass treated with it also retained its original lead sorption capacity. A mechanism for the fixation process is suggested.

Erratum Appl Microbiol Biotechnol (1999) 51: 780–785 (pp. 612-612).

Sections

Personal tools

Applied Microbiology and Biotechnology (v.52, #4)

Sections

Personal tools

Local resources

Applied Microbiology and Biotechnology (v.52, #4)