Check out our New Publishers' Select for Free Articles

Analytical and Bioanalytical Chemistry (v.387, #6)

Luminescence spectrometry by Alberto Cepeda Sáez (pp. 1955-1956).

is Full Professor in Nutrition and Food Safety and presently Head of the Department of Analytical Chemistry, Nutrition and Food Sciences of the University of Santiago de Compostela. His main research fields are in the development of analytical methods for control of veterinary drugs and other substances illegaly used in meat production (HPLC coupled to fluorescence, chemiluminescence and laser induced fluorescence detectors, GCMSn, HPLCMSn).

Solid-phase microextraction of benzimidazole fungicides in environmental liquid samples and HPLC–fluorescence determination by A. López Monzón; D. Vega Moreno; M. E. Torres Padrón; Z. Sosa Ferrera; J. J. Santana Rodríguez (pp. 1957-1963).

Solid-phase microextraction (SPME) coupled with high-performance liquid chromatography (HPLC) with fluorescence detection was optimized for extraction and determination of four benzimidazole fungicides (benomyl, carbendazim, thiabendazole, and fuberidazole) in water. We studied extraction and desorption conditions, for example fiber type, extraction time, ionic strength, extraction temperature, and desorption time to achieve the maximum efficiency in the extraction. Results indicate that SPME using a Carboxen–polydimethylsiloxane 75 μm (CAR–PDMS) fiber is suitable for extraction of these types of compound. Final analysis of benzimidazole fungicides was performed by HPLC with fluorescence detection. Recoveries ranged from 80.6 to 119.6 with RSDs below 9% and limits of detection between 0.03 and 1.30 ng mL⁻¹ for the different analytes. The optimized procedure was applied successfully to the determination of benzimidazole fungicides mixtures in environmental water samples (sea, sewage, and ground water).

Keywords: Solid-phase microextraction; Benzimidazole fungicides; High-performance liquid chromatography; Water analysis

Development of a sensitive micro-magnetic chemiluminescence enzyme immunoassay for the determination of carcinoembryonic antigen by Wijitar Dungchai; Weena Siangproh; Jin-Ming Lin; Orawon Chailapakul; Si Lin; Xitang Ying (pp. 1965-1971).

A micro-magnetic chemiluminescence (CL) enzyme immunoassay with high sensitivity, selectivity, and reproducibility was developed for the determination of the tumor marker, carcinoembryonic antigen (CEA) in human serum. A sandwich scheme assay has been utilized with fluorescein isothiocyanate antibody (FITC)-labeled anti-CEA antibody and alkaline phosphate (ALP)-labeled anti-CEA antibody being used in the CL detection. The CL signal produced by the emission of photons from 4-methoxy-4-(3-phosphate-phenyl)-spiro-(1,2-dioxetane-3,2′-adamantane) (AMPPD) was directly proportional to the amount of analyte present in a sample solution. The influences of the reaction time of antigen with antibody, the reaction time of substrate with label, the dilution ratio of ALP-labeled anti-CEA antibody, the concentration of FITC-labeled anti-CEA antibody, and other relevant variables upon the CL signal were examined and optimized. The CL responses depended linearly on the CEA concentration over the range from 2 to 162 ng mL⁻¹ in a logarithmic plot. Assay sensitivity as low as 0.69 ng mL⁻¹ was achieved. A coefficient of variance of less than 13% was obtained for intra- and inter-assay precision. This method has been successfully applied to the analysis of CEA in human serum. According to the procedure based on spiked standards, the recoveries obtained were 80–110%. Comparison experiments were carried out with the commercially available CEA chemiluminescence immunoassay. Satisfactory results were obtained according to a paired t-test method (t value < t _critical at the 95% confidence level).

Keywords: Micro-magnetic beads; Carcinoembryonic antigen; Tumor; Chemiluminescence enzyme immunoassay; Marker

New method for the photo-chemiluminometric determination of benzoylurea insecticides based on acetonitrile chemiluminescence by M. D. Gil García; M. Martínez Galera; R. Santiago Valverde (pp. 1973-1981).

The viability of tandem photochemical reaction–chemiluminescence detection has been studied for the determination of five benzoylurea insecticides, namely, diflubenzuron, triflumuron, hexaflumuron, lufenuron and flufenoxuron. The ‘on-line’ photochemical reaction of benzoylurea pesticides provides an enhanced chemiluminescence response of the pesticides during their oxidation by potassium hexacyanoferrate(III) and sodium hydroxide, whose signal increases with the percentage of acetonitrile in the reaction medium. The determination was performed using a photoreactor consisting of a PFA (perfluoroalkoxy) tube reactor coil (5 m × 1.6-mm O.D. and 0.8-mm I.D.) and an 8-W xenon lamp. As the yield of the photoderivatization process and the chemiluminescent signals depend on the percentage of acetonitrile, the chromatographic column (a Gemini C18, Phenomenex 150 mm × 4.6 mm, 5-μm particle size) was chosen with the aim of using high percentages of this organic solvent in the mobile phase. Previous studies showed that the rate of the chemiluminescent reaction was very fast. Therefore, a modification was carried out in the detector in order to mix the analytes and reactants as near as possible to the measure cell. The optimised method was validated with respect to linearity, precision, limits of detection and quantification accuracy. Under the optimised conditions, linear working range extends three orders of magnitude with the relative standard deviation of intra-day precision below 10% and detection limits between 0.012 and 0.18 μg mL⁻¹, according to the compound. The proposed method has been successfully applied to the determination of benzoylureas in cucumber with good results. Figure

Keywords: Chemiluminescence detection; Photochemical derivatization; HPLC; Acetonitrile; Vegetables

A sensitive semi-micro column HPLC method with peroxyoxalate chemiluminescence detection and column switching for determination of MDMA-related compounds in hair by Shinichi Nakamura; Mitsuhiro Wada; Brian L. Crabtree; Patricia M. Reeves; John H. Montgomery; H. Joseph Byrd; Shiro Harada; Naotaka Kuroda; Kenichiro Nakashima (pp. 1983-1990).

A sensitive semi-micro column HPLC method with peroxyoxalate chemiluminescence (POCL) detection and column switching has been developed for simultaneous determination of 3,4-methylenedioxymethamphetamine (MDMA) and related compounds, for example 3,4-methylenedioxyamphetamine, methamphetamine, and amphetamine, in hair. After digestion of the hair with 1 mol L⁻¹ sodium hydroxide the compounds were extracted with n-heptane and derivatized with 4-(N,N-dimethylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole. A mixture of hydrogen peroxide and bis(2,4,5-trichloro-6-carbopentoxyphenyl)oxalate in acetonitrile was used as post-column CL reagent. Calibration plots showed linearity was good (r = 0.999); detection limits were 0.02–0.16 ng mg⁻¹ hair at a signal-to-noise ratio of 3. The precision of the method, as RSD (n = 5), in intra-day and inter-day assays was better than 5.0 and 6.9%, respectively. The proposed method was sufficiently sensitive to detect low ng mg⁻¹ levels of MDMA and related compounds in hair, and could be used for quantification of the compounds in hair samples from patients treated in a chemical dependency unit.

Keywords: 3,4-Methylenedioxymethamphetamine (MDMA); 3,4-Methylenedioxyamphetamine (MDA); Hair analysis; Peroxyoxalate chemiluminescence; 4-(N,N-Dimethylaminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (DBD-F); Column switching

Assessment of enrofloxacin and ciprofloxacin accumulation in pig and calf hair by HPLC and fluorimetric detection by Marta Gratacós-Cubarsí; José-Antonio García-Regueiro; Massimo Castellari (pp. 1991-1998).

Enrofloxacin is a synthetic bacteriostatic administered in veterinary therapy. It can also be used illegally as a growth promoter to enhance feed efficiency and weight gain. This practice is banned in several countries due to its potential negative effects on the environment and human health. A suitable method for extracting and quantifying enrofloxacin (ENR) and its main metabolite ciprofloxacin (CPR) in cattle and pig hair by high-performance liquid chromatography–fluorimetric detection (HPLC–FLD) had been proposed. ENR and CPR were extracted from hair samples with methanol acidified with trifluoroacetic acid for 24 h at 70 °C. The extracts were evaporated and redissolved in the mobile phase before injection. This simplified procedure enabled the detection of both CPR and ENR at ng g⁻¹ levels (limit of detection 4–5 ng g⁻¹) without further purification. Detectable residues of ENR were found in calf and pig hairs after the pharmacological treatment was started. Mean concentrations of quinolone (ENR, CPR) in contaminated hairs ranged from 20 to 2,518 ng g⁻¹ in calves and from 152 to 1,140 ng g⁻¹ in pigs. Hair pigmentation enhanced quinolone accumulation significantly. Hair analysis seems to increase the time window available for the retrospective detection of illegal ENR administration compared to edible tissue analysis.

Keywords: Drug monitoring/drug screening; Bioanalytical methods; Fluorescence/luminiscence; HPLC

Determination of resveratrol in wine by photochemically induced second-derivative fluorescence coupled with liquid–liquid extraction by T. Galeano Díaz; I. Durán Merás; D. Airado Rodríguez (pp. 1999-2007).

Basic studies on the photochemical behaviour of trans-resveratrol and its photoproduct are reported. Photometrically and fluorimetrically calculated acidity constants of the former were determined. The usefulness of the determination of resveratrol by photochemically induced fluorescence and second-derivative photochemically induced fluorescence was also examined. The very weakly fluorescent trans-resveratrol is converted into a highly fluorescent photoproduct by irradiating hydroethanolic solutions of trans-resveratrol containing 40% v/v of ethanol for 60 s with intense UV radiation. The photoproduct presents excitation and emission maxima centred at 260 nm, and 364 and 382 nm, respectively. Under these conditions, a linear relationship between fluorescence intensity and trans-resveratrol concentration was found between 6.6 and 66 ng mL⁻¹. Optimum conditions for the extraction of trans-resveratrol from an aqueous phase at pH 5.0 with diethylether were a phase ratio (aqueous/organic) of 2, a shaking time of 60 s and a buffer concentration of 0.15 mol L⁻¹. An extraction recovery of 100% was reached under these conditions. The optimized extraction procedure was applied to the analysis of resveratrol in wine samples, employing the amplitude between 356 and 364 nm of the second-derivative photoinduced emission spectrum as analytical signal. It was found that there is not matrix effect and recoveries around 100% were obtained at different fortification levels.

Keywords: Photochemically induced fluorescence; Second-derivative; Liquid–liquid extraction; Resveratrol; Wine

Effect of heavy atoms in bioluminescent reactions by Tamara N. Kirillova; Nadezhda S. Kudryasheva (pp. 2009-2016).

Bioluminescent reactions of luminous organisms are excellent models for studying the effects of heavy atoms on enzymatic processes. The effects of potassium halides with halide anions of different atomic weight were compared in bioluminescent reactions of the firefly (Luciola mingrelica), a marine coelenterate (Obelia longissima), and a marine bacterium (Photobacterium leiognathi). Two mechanisms of the effects of the halides were examined—the physicochemical effect of the external heavy atom, based on spin–orbit interactions in electron-excited structures, and the biochemical effect, i.e. interactions with the enzymes resulting in changes of enzymatic activity. The physicochemical effect was evaluated by using photoexcitation of model fluorescent compounds (flavin mononucleotide, firefly luciferin, and coelenteramide) of similar structure to the bioluminescence emitters. The bioluminescent and photoluminescent inhibition coefficients were calculated and compared for the luminous organisms to evaluate the relative contributions of the two mechanisms. The biochemical mechanism was found to be dominant. Hence, the bioluminescent reactions can be used as assays to monitor enzyme inhibition, in metabolic processes, by Br or I-containing compounds.

Keywords: Heavy-atom effect; Bioluminescent reaction; Enzymatic activity; Luciferase; Halide anions

Multivalence and spot heterogeneity in microarray-based measurement of binding constants by Martin Elbs; Michael Hulko; Jens Frauenfeld; Rainer Fischer; Roland Brock (pp. 2017-2025).

Microarray technology is increasingly used for a miniaturised and parallel measurement of binding constants. In microarray experiments heterogeneous functionalization of surfaces with capture molecules is a problem commonly encountered. For multivalent ligands, especially, however, binding is strongly affected by receptor density. Here we show that high-resolution imaging of microarrays followed by image segmentation and separate analysis of bright and dark parts provides valuable information about ligand binding. Binding titrations were conducted with monovalent and bivalent fluorescent ligand peptides for the model receptor vancomycin. Microarrays were scanned with a confocal microscope and inhomogeneous spots were evaluated either as a whole or after segmentation into bright and dark areas. Whereas the binding constant for the monovalent ligand was hardly affected by spot heterogeneity, for the bivalent ligand affinity was higher for the parts of the spots with a greater density of receptors. This information was lost if the spots were analysed as a whole. These results reveal that imaging resolution may be a key factor in miniaturised binding assays, emphasising the importance of high-resolution images and image segmentation for new techniques, for example SPR imaging.

Keywords: Microarray; Multivalence; Vancomycin; Fluorescence imaging; Spatial resolution

Efficient preparation of amine-modified oligodeoxynucleotide using modified H-phosphonate chemistry for DNA microarray fabrication by Nagendra Kumar Kamisetty; Seung Pil Pack; Mitsuru Nonogawa; Kamakshaiah Charyulu Devarayapalli; Seiya Watanabe; Tsutomu Kodaki; Keisuke Makino (pp. 2027-2035).

Amine-modified oligodeoxynucleotides (AMO) are commonly used probe oligodeoxynucleotides for DNA microarray preparation. Two methods are currently used for AMO preparation—use of amine phosphoramidites protected by acid-labile monomethoxytrityl (MMT) groups or alkali-labile trifluoroacetyl (TFA) groups. Because conventional AMO preparation procedures have defects, for example stringent acidic conditions are required for deprotection of MMT and hydrophobic purification cannot be used for TFA-protected amino groups, conventional preparation of AMO is unlikely to result in the expected outcome. In this paper a method of AMO synthesis using modified H-phosphonate chemistry is suggested. An aliphatic diamine is coupled with a phosphonate group forming a phosphoramidate linkage to the last internucleotide phosphate of oligodeoxynucleotides. In this method dimethoxytrityl (DMT) purification steps are used and stringent acid deprotection is not required to obtain the AMO. Although the method could lead to formation of AMO diastereomers, melting-temperature and CD analysis showed for two AMO that DNA duplex formation was the same as when normal oligodeoxynucleotides were used. Also, when these AMO were used as probes for DNA microarrays the immobilization efficiency was similar to that for AMO probes prepared by conventional means using an amino-modifier unit. The hybridization performance of these AMO was better than for those prepared conventionally. The procedures suggested would be useful for preparation of efficient AMO for fabrication of DNA microarrays and DNA-based nanoparticle systems.

Keywords: Amine-modified oligodeoxynucleotide; DNA microarray; H-phosphonate; Phosphoramidate linkage

Determination, by inductively coupled plasma mass spectrometry, of changes in cellular metal content resulting from herpes simplex virus-1 (HSV-1) infection by Katie DeNicola Cafferky; Richard L. Thompson; Douglas D. Richardson; Joseph A. Caruso (pp. 2037-2043).

Metals and metal-containing compounds are known to play important roles in many biological processes, including metabolic and detoxification pathways and the formation and function of proteins. Like all organisms, viruses are expected to contain different metals. These metals, either by themselves or in the form of metalloproteins, may be involved in the virus’s ability to infect healthy cells and replicate within them. Identification and speciation of metals in control cells and in cells affected by a virus could be helpful in elucidating infection and replication mechanisms; these might, in turn, be vital to the development of more effective treatments. There has, however, been no extensive investigation of the metals specific viruses contain or affect. The objective of this study was to investigate changes in cellular metal content resulting from herpes simplex virus 1 (HSV-1) infection. Inductively coupled plasma mass spectrometry was used to identify differences between metal concentrations in uninfected and HSV-1-infected mammalian cells. Although it can be assumed that decreases in metal content are a result of cellular response to the virus, increases can be attributed either to cellular response or to the HSV-1 virus itself. Microwave digestion and flow injection methods suitable for small sample volumes were used, and the effects of different virus inactivation procedures were explored. This work is the first step in the identification of metals pertinent to HSV-1 infection and lays the foundation for future studies concentrating on characterization of these metal-associated or containing molecules.

Keywords: Virus; Herpes; Metal; Inductively coupled plasma mass spectrometry

Studies of the separation and characterisation of mixtures of starch and cellulose derivatives by use of chromatography and mass spectrometry by C. Nilsson; A. Asplund; H. Schagerlöf; C. Melander; A. Andersen; F. Tjerneld; A. Cohen; L. Gorton (pp. 2045-2055).

In this work a method was developed for characterisation of commercially available polymers consisting of mixtures of substituted cellulose and starch. Selective hydrolysis with specific enzymes was used to achieve separation of the two polymers in the mixture. Enzymes hydrolysing (1→4)-α-D and (1→6)-α-D-glycosidic bonds were used for the starch part and enzymes hydrolysing (1→4)-β-D-glycosidic bonds for the cellulose part. The hydrolysed fraction was separated from the unhydrolysed fraction and characterised by use of size-exclusion chromatography (SEC), to confirm that enzyme hydrolysis of the different polymers had occurred. High-performance anion-exchange chromatography (HPAEC) was performed to determine the amount of unmodified glucose units (UGU) in the fractions. Electrospray ionisation mass spectrometry (ESIMS) was used for determination of the substituents. All products were converted to monomers by acid hydrolysis to simplify mass spectral identification of the substituents. The monomers were further subjected to acetylation with acetic acid anhydride to facilitate identification of the substituents. By combining the results from the different analytical techniques a picture of the samples was obtained.

Keywords: Carbohydrates; Enzyme hydrolysis; Size-exclusion chromatography; Anion-exchange chromatography; Mass spectrometry

S,S,S-Tris(2-ethylhexyl) phosphorotrithioate as an effective solvent mediator for a mexiletine-sensitive membrane electrode by Takashi Katsu; Yumi Tsunamoto; Nobumitsu Hanioka; Keiko Komagoe; Kazufumi Masuda; Shizuo Narimatsu (pp. 2057-2064).

S,S,S-Tris(2-ethylhexyl) phosphorotrithioate proved to be an effective solvent mediator for constructing a mexiletine-sensitive membrane electrode in combination with an ion-exchanger, sodium tetrakis[3,5-bis(2-methoxyhexafluoro-2-propyl)phenyl]borate. Among a series of phosphorus compounds containing phosphoryl (P=O) groups, this solvent mediator showed the highest sensitivity to mexiletine in phosphate-buffered physiological saline containing 0.15 mol L⁻¹ NaCl and 0.01 mol L⁻¹ NaH₂PO₄/Na₂HPO₄ (pH 7.4), giving a detection limit of 2 × 10⁻⁶ mol L⁻¹ with a slope of 58.8 mV decade⁻¹. This is the best reported detection limit of any mexiletine-sensitive electrode developed to date. Owing to its high selectivity toward inorganic cations, the electrode was used to determine the level of mexiletine in saliva, the monitoring of which is quite effective for controlling the dose of this drug noninvasively. The mexiletine concentrations determined with the mexiletine-sensitive electrode compared favorably with those determined by high-performance liquid chromatography.

Keywords: Ion-selective electrode; Mexiletine determination; S,S,S-Tris(2-ethylhexyl) phosphorotrithioate; Solvent mediator; Drug monitoring

Fluorescence optosensing implemented with sequential injection analysis: a novel strategy for the determination of labetalol by E. J. Llorent-Martínez; D. Šatínský; P. Solich (pp. 2065-2069).

The coupling of sequential injection analysis and optosensing has been developed for the first time. It has been applied to the determination of labetalol in both pharmaceuticals and urine samples, with the analytical signal (native fluorescence) being monitored directly on sensing zone microbeads. The solid support used was the nonionic silica gel C₁₈, using 20% methanol–water (v:v) as a carrier. By using a 1.5-ml sample volume , we achieved a detection limit of 3.3 ng ml⁻¹. This sensitivity allowed the determination of the compound in urine samples. A recovery study was carried out at the labetalol levels usually found in urine after pharmaceuticals administration, and recovery percentages close to 100% were obtained. The relative standard deviation was 3.4% for 100 ng ml⁻¹ labetalol. No pretreatment was needed for urine samples, only an appropriate dilution, therefore minimizing the time required per sample analysis. In addition, the determination of the analyte was also carried out in one pharmaceutical, with a satisfactory result being obtained.

Keywords: Labetalol; Sequential injection analysis; Optosensor; Urine; Pharmaceuticals

New noncellular fluorescence microplate screening assay for scavenging activity against singlet oxygen by David Costa; Eduarda Fernandes; João L. M. Santos; Diana C. G. A. Pinto; Artur M. S. Silva; José L. F. C. Lima (pp. 2071-2081).

In the present study, a new fluorescence microplate screening assay for evaluating scavenging activity against singlet oxygen (¹O₂) was implemented. The chemical generation of ¹O₂ was promoted using the thermodissociable endoperoxide of disodium 3,3′-(1,4-naphthalene)bispropionate (NDPO₂). The detection of ¹O₂ was achieved using dihydrorhodamine 123 (DHR), a nonfluorescent molecule that is oxidizable to the fluorescent form rhodamine 123 (RH). The combined use of a ¹O₂-selective generator and a highly sensitive probe (DHR) was then successfully applied to perform a screening assay of the ¹O₂ scavenging activities of ascorbic acid, penicillamine, cysteine, N-acetylcysteine (NAC), methionine, reduced glutathione (GSH), dihydrolipoic acid, lipoic acid, and sodium azide. All of these antioxidants exhibited concentration-dependent ¹O₂ scavenging capacities. They could be ranked according to observed activity: ascorbic acid> cysteine> penicillamine> dihydrolipoic acid > GSH> NAC> sodium azide> lipoic acid (IC₅₀ values of 3.0 ± 0.2, 8.0 ± 0.7, 10.9 ± 0.8, 25.2 ± 4.5, 57.4 ± 5.9, 138 ± 13, 1124 ± 128, 2775 ± 359 μM, mean±SEM, respectively) > methionine (35% of scavenging effect at 10 mM). In conclusion, the use of NDPO₂ as a selective generator for ¹O₂ and its fluorescence detection by the highly sensitive probe DHR is shown to be a reliable and resourceful analytical alternative means to implement a microplate screening assay for scavenging activity against ¹O₂. Generation and detection of singlet oxygen

Keywords: Singlet oxygen; Endoperoxide of disodium; 3,3′-(1,4-naphthalene)bispropionate; Dihydrorhodamine 123; Fluorescent probe; Microplate screening assay

Spectrofluorimetric determination of trace amounts of coenzyme A using a terbium ion–ciprofloxacin complex probe in the presence of periodic acid by Jing Li; Xiaoxia Ge; Chongqiu Jiang (pp. 2083-2089).

A new spectrofluorimetric method was developed for the determination of trace amounts of coenzyme A (CoA). In the presence of periodic acid (H₅IO₆), CoA can remarkably enhance the fluorescence intensity of the Tb³⁺–ciprofloxacin (CIP) complex at 545 nm in a buffer solution at pH 5.4; the enhanced fluorescence intensity of the Tb³⁺ ion is proportional to the concentration of CoA. The optimal conditions for the determination of CoA were also investigated. The linear range and the detection limit for the determination of CoA were 6.08 × 10⁻⁶–1.64 × 10⁻⁵ and 2.1 × 10⁻⁸ mol L⁻¹, respectively. This method is simple, practical and relatively free of interference from coexisting substances, and can be successfully applied to assess CoA in injection and biological samples. Moreover, the enhancement mechanism of the fluorescence intensity of the CoA–Tb³⁺–CIP system in the presence of H₅IO₆ is also discussed.

Keywords: Spectrofluorimetric method; Coenzyme A; Ciprofloxacin; Terbium; Periodic acid

Semi-quantitative determination of cationic surfactants in aqueous solutions using gold nanoparticles as reporter probes by Chi-Lap Kuong; Wei-Yu Chen; Yu-Chie Chen (pp. 2091-2099).

Concentrations of cationic surfactants in aqueous solutions have been estimated on the basis of changes in the color of gold nanoparticles, used as reporter probes. We have shown that the colors of gold nanoparticles with anionic protective groups on their surfaces shift from red to indigo/purple and then back to red in a range of cationic surfactant solutions in which concentrations vary from very low to above the theoretical CMCs. The color changes occur near the theoretical CMCs, presumably because the presence of surfactant micelles in the solution prevents the gold nanoparticles from aggregating. We have used gold nanoparticles as reporter probes to determine the concentrations of cationic surfactants in products such as hair conditioners, which often contain large amounts of alkyltrimethylammonium halides. Although this approach can only provide an estimate, it can be performed simply by addition of a given amount of gold nanoparticles to a series of diluted solutions, without the need for instruments or labor-intensive procedures. Figure Photographs of a series of diluted hair conditioner solutions with added gold nanoparticles

Keywords: Gold nanoparticles; Cationic surfactants; Iron oxide particles; Chemical sensor; SALDI MS

Development of an electronic tongue based on a PEDOT-modified voltammetric sensor by V. Martina; K. Ionescu; L. Pigani; F. Terzi; A. Ulrici; C. Zanardi; R. Seeber (pp. 2101-2110).

Three different electrodes were tested for use as nonspecific amperometric sensors for blind analysis on real matrices, namely different fruit juices from different fruits or different brands. The first two electrodes were traditional Pt and Au electrodes, while the third one was modified with poly(3,4-ethylenedioxythiophene) conducting polymer. The sensors were tested separately, tested coupled to each other, and also tested together. The responses of the electrode system(s) were first screened via PCA and then their discriminant capabilities were quantified in terms of the sensitivities and specificities of their corresponding PLS-DA multivariate classification models. Particular attention was paid to analyzing the evolution of the response over subsequent potential sweeps. The modified electrode demonstrated the most discriminating ability, and it was the only system capable of satisfactorily performing the most complex task attempted during the analysis: discriminating between juices from the same fruit but from different brands. Moreover, the electrode “cleaning” procedure required between two subsequent potential sweeps was much simpler for the modified electrode than for the others. This electrode system was therefore shown to be a good candidate for use as an informative element in an electronic tongue applied to the analysis of other food matrices.

Keywords: Amperometric sensor; Electronic tongue; Conducting polymer; Classification; Fruit juices

New hexamethine–hemicyanine dyes for the development of integrated optochemical sensors by Laia Rivera; Mar Puyol; Serguei Miltsov; Julian Alonso (pp. 2111-2119).

New far-visible absorbing anilino-cyanine dyes have been synthesised for future application as chromoionophores in integrated waveguide absorbance optodes based on bulk optodes. The effect of the heterocycle, of the substitution of the heterocyclic nitrogen and of the type of heptamethine central ring on the pK a values (4.3–8.2 in ethanol–water solutions and 9.5–11.0 in plasticised PVC membranes), on the spectroscopic characteristics of the dye and on photostability is discussed. pH-selective bulk optodes have been formulated as a first approach to develop ion-selective optodes, and sensitivity, repeatability, lifetime and response time have been determined. The dyes show good analytical behaviour for use as chromoionophores for the development of ion-selective optodes. Reversible (80–87%), fast (tr_90% = 0.94–2.28 min) and pH-sensitive membranes (slopes of 0.09–0.23 ΔAbs·pHdec^–1, absorbance range 0.19–0.53) have been obtained. Moreover, they exhibit good spectroscopic features for employment with integrated optochemical sensors: absorption maxima of the acidic species in plasticised PVC membranes matched those of 650–670-nm LEDs, high molar absorption coefficients ( $$ varepsilon _{{{ ext{acidic}}}} = 3.5 imes 10^{4} - 9.3 imes 10^{4} $$ L mol^–1 cm^–1 and $$ varepsilon _{{{ ext{basic}}}} = 1.9 imes 10^{4} - 6.7 imes 10^{4} $$ L mol⁻¹ cm⁻¹) and fluorescence. Absorption spectra of the acidic and basic structures of one of the synthesised chromoionophores at different pKa values.

Keywords: Cyanine–aniline dyes; Far visible; pH indicators; Optodes

Cation identity dependence of crown ether photonic crystal Pb²⁺ sensing by Fangyong Yan; Sanford Asher (pp. 2121-2130).

We quantitatively modeled the volume phase transition of a hydrogel containing a crystalline colloidal array with a crown ether ligand which binds Pb²⁺. The hydrogel volume response and the wavelength diffracted depend on the Pb²⁺ concentration and on both the ionic strength and the valence of the nonbinding ionic species. We successfully modeled the response of this hydrogel Pb²⁺ sensor to ionic strength and the cation valence of the added salts. Figure Cation identity dependence of crown ether photonic crystal Pb⁺ sensing

Keywords: Phase transition; Hydrogel; Crystalline colloidal array; Crown ether ligand; Ionic strength; Wavelength diffracted

Novel coumarin-based fluorescent pH indicators, probes and membranes covering a broad pH range by Anna S. Vasylevska; Alexander A. Karasyov; Sergey M. Borisov; Christian Krause (pp. 2131-2141).

A new family of coumarin-based pH indicators was synthesized. They are sensitive to pH in either weakly acidic or weakly basic solution. The indicators possess moderate to high brightness, excellent photostability and compatibility with light-emitting diodes. The indicators were covalently immobilized on the surface of amino-modified polymer microbeads which in turn were incorporated into a hydrogel matrix to obtain novel pH-sensitive materials. When a mixture of two different microbeads is used, the membranes are capable of optical pH sensing over a very wide range comparable to the dynamic range of the glass electrode (pH 1–11). A new family of coumarin-based pH indicators is synthesized for the use in either weakly acidic or weakly basic solution. The indicators possess moderate to high brightness, excellent photostability and compatibility with light-emitting diodes. Novel pH-sensitive materials are obtained by covalent immobilization of the indicators on the surface of amino-modified polymer microbeads which in turn are incorporated into a hydrogel matrix. Sensing of pH over a very wide range also becomes possible.

Keywords: pH indicator; Optical sensor; Fluorescence; Coumarin

Analytical methods for the determination of selected steroid sex hormones and corticosteriods in wastewater by Emmanuelle Vulliet; Jean-Baptiste Baugros; Marie-Magdeleine Flament-Waton; Marie-Florence Grenier-Loustalot (pp. 2143-2151).

An analytical method for the determination of 12 selected estrogens, progestagens and corticosteroids is presented. The optimization of the method, including liquid chromatography separation, extraction on a solid phase, purification on a silica gel cartridge and detection by mass spectrometry, is described. Both the repeatability, with relative standard deviation ranging from 1.4 to 2.7%, and the accuracy, with recoveries ranging from 92.7 to 102.4%, were very satisfactory for ten of the target analytes. The limits of detection were lower than 1 ng/L for progestagens, androgens and corticosteroids, and ranged between 0.9 and 4.3 ng/L for estrogens. The results of the analysis of two sewage treatment plants in the area of Lyon (France) by this method reveal that all the compounds investigated are present in the effluents. The estrogen most frequently detected was estrone, with a median of 26.1 ng/L. The target progestagens were detected with concentrations ranging between 5 and 41 ng/L. Androgens were also present in most of the samples in the range 1–30 ng/L, while the corticosteroids were present only in one plant, with a median of 31.9 ng/L.

Keywords: Endocrine disruptors; Wastewater; Analysis; Liquid chromatography; Mass spectrometry

Behaviour of semipermeable membrane devices in neutral pesticide uptake from waters by Francesc A. Esteve-Turrillas; Agustín Pastor; Miguel de la Guardia (pp. 2153-2162).

The application of semipermeable membrane devices (SPMDs) has been evaluated as a passive sampler for the collection of multiresidue pesticides in continental waters. Seven chlorinated, five organophosphorus, six carbamate, nine pyrethroid and ten other pesticides were tested in order to estimate which compounds can be retained with these devices. The effect of water parameters, such as temperature, pH, ionic strength and organic matter content, were evaluated for their effect on the retention of the pesticides by the SPMDs. Studies of uptake from water were performed in a glass beaker containing 2 L distilled water spiked with 50 ng L⁻¹ of each pesticide investigated. A SPMD was put in the beaker, under turbulent conditions, and analysed after 2 days’ extraction. The contents of each SPMD were microwave-assisted-extracted twice with 30 mL hexane–acetone, to 90 °C for 10 min, and this was followed by a cleanup based on acetonitrile partitioning and solid-phase extraction. Gas chromatography with tandem mass spectrometry detection was employed for determination of pesticides, and provided low limits of detection from 0.5 to 7 ng per SPMD. Higher absorption rates were observed for pyrethroid, organophosphorus and chlorinated compounds than for carbamates. Pesticide uptake rates were independent of the water composition and decreased at low temperature.

Keywords: Semipermeable membrane devices; Pesticide residues; Tandem mass spectrometry; Water analysis

Determination of volatile organic hydrocarbons in water samples by solid-phase dynamic extraction by Maik A. Jochmann; Xue Yuan; Torsten C. Schmidt (pp. 2163-2174).

In the present study a headspace solid-phase dynamic extraction method coupled to gas chromatography–mass spectrometry (HS-SPDE-GC/MS) for the trace determination of volatile halogenated hydrocarbons and benzene from groundwater samples was developed and evaluated. As target compounds, benzene as well as 11 chlorinated and brominated hydrocarbons (vinyl chloride, dichloromethane, cis-1,2-dichloroethylene, trans-1,2-dichloroethylene, carbon tetrachloride, chloroform, trichloroethylene, tetrachloroethylene, bromoform) of environmental and toxicological concern were included in this study. The analytes were extracted using a SPDE needle device, coated with a poly(dimethylsiloxane) with 10% embedded activated carbon phase (50-μm film thickness and 56-mm film length) and were analyzed by GC/MS in full-scan mode. Parameters that affect the extraction yield such as extraction and desorption temperature, salting-out, extraction and desorption flow rate, extraction volume and desorption volume, the number of extraction cycles, and the pre-desorption time have been evaluated and optimized. The linearity of the HS-SPDE-GC/MS method was established over several orders of magnitude. Method detection limits (MDLs) for the compounds investigated ranged between 12 ng/L for cis-dichloroethylene and trans-dichloroethylene and 870 ng/L for vinyl chloride. The method was thoroughly validated, and the precision at two concentration levels (0.1 mg/L and a concentration 5 times above the MDL) was between 3.1 and 16% for the analytes investigated. SPDE provides high sensitivity, short sample preparation and extraction times and a high sample throughput because of full automation. Finally, the applicability to real environmental samples is shown exemplarily for various groundwater samples from a former waste-oil recycling facility. Groundwater from the site showed a complex contamination with chlorinated volatile organic compounds and aromatic hydrocarbons. Figure SPDE Principle

Keywords: Solid-phase dynamic extraction; Volatile organic compound; Groundwater analysis; Gas chromatography–mass spectrometry; Setschenow constants

New sample treatment for determination of linear alkylbenzene sulfonate (LAS) in agricultural soils by liquid chromatography with fluorescence detection by M. Nimer; O. Ballesteros; A. Navalón; G. Crovetto; C. Verge; I. López; J. L. Berna; J. L. Vílchez (pp. 2175-2184).

A new sample-treatment procedure has been developed for determination of total linear alkylbenzene sulfonate (LAS), i.e. homologues and isomers, in agricultural soil. The procedure involves two steps, ultrasound-assisted extraction of LAS from the samples with methanol then clean-up of the methanolic extracts and preconcentration of the LAS by solid-phase extraction on two adsorbent cartridges (SAX and C₁₈). The ultrasound-assisted procedure reduces extraction time (10 min in contrast with 6–12 h for conventional Soxhlet extraction) and requires only small volumes of organic solvent. The effect of different variables interacting in the ultrasound-assisted extraction process was studied. Finally, separation and quantification of the homologues and isomers of LAS was performed by liquid chromatography with fluorescence detection (LC−FD). 2-Octylbenzenesulfonic acid sodium salt (Na-2ØC₈-LAS) was used as internal standard. The proposed method was satisfactorily used for determination of LAS in agricultural soil samples from the fertile plain of Granada (Spain). Figure LAS treatment, a field experience

Keywords: Linear alkylbenzene sulfonate (LAS); Ultrasound extraction; Liquid chromatography; Environmental analysis; Soil analysis

Novel methodology for the study of mercury methylation and reduction in sediments and water using ¹⁹⁷Hg radiotracer by Sergio Ribeiro Guevara; Suzana Žižek; Urška Repinc; Soledad Pérez Catán; Radojko Jaćimović; Milena Horvat (pp. 2185-2197).

Mercury tracers are powerful tools that can be used to study mercury transformations in environmental systems, particularly mercury methylation, demethylation and reduction in sediments and water. However, mercury transformation studies using tracers can be subject to error, especially when used to assess methylation potential. The organic mercury extracted can be as low as 0.01% of the endogenous labeled mercury, and artefacts and contamination present during methylmercury (MeHg) extraction processes can cause interference. Solvent extraction methods based on the use of either KBr/H₂SO₄ or HCl were evaluated in freshwater sediments using ¹⁹⁷Hg radiotracer. Values obtained for the ¹⁹⁷Hg tracer in the organic phase were up to 25-fold higher when HCl was used, which is due to the coextraction of ¹⁹⁷Hg²⁺ into the organic phase during MeHg extraction. Evaluations of the production of MeHg gave similar results with both MeHg extraction procedures, but due to the higher Hg²⁺ contamination of the controls, the uncertainty in the determination was higher when HCl was used. The Hg²⁺ contamination of controls in the HCl extraction method showed a nonlinear correlation with the humic acid content of sediment pore water. Therefore, use of the KBr/H₂SO₄ method is recommended, since it is free from these interferences. ¹⁹⁷Hg radiotracer (T _1/2 = 2.673 d) has a production rate that is about 50 times higher than that of ²⁰³Hg (T _1/2 = 46.595 d), the most frequently used mercury radiotracer. Hence it is possible to obtain a similar level of performance to ²⁰³Hg when it is used it in short-term experiments and produced by the irradiation of ¹⁹⁶Hg with thermal neutrons, using mercury targets with the natural isotopic composition. However, if the 0.15% natural abundance of the ¹⁹⁶Hg isotope is increased, the specific activity of the ¹⁹⁷Hg tracer can be significantly improved. In the present work, ¹⁹⁷Hg tracer was produced from mercury 51.58% enriched in the ¹⁹⁶Hg isotope, and a 340-fold increase in specific activity with respect to natural mercury targets was obtained. When this high specific activity tracer is employed, mercury methylation and reduction experiments with minimum mercury additions are feasible. Tracer recovery in methylation experiments (associated with Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike, but also with Hg²⁺ contamination and Me¹⁹⁷Hg artefacts) with marine sediments was about 0.005% g⁻¹ WS (WS: wet sediment) after 20 h incubation with mercury additions of 0.05 ng g⁻¹ WS, which is far below natural mercury levels. In this case, the amount of Hg²⁺ reduced to Hg⁰ (expressed as the percent ¹⁹⁷Hg⁰ recovered with respect to the ¹⁹⁷Hg²⁺ added) varied from 0.13 to 1.6% g⁻¹ WS. Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike after 20 h of incubation of freshwater sediment ranged from 0.02 to 0.13% g⁻¹ WS with mercury additions of 2.5 ng g⁻¹ WS, which is also far below natural levels. ¹⁹⁷Hg⁰ recoveries were low, 0.0058 ± 0.0013% g⁻¹ WS, but showed good reproducibility in five replicates. Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spiked in freshwater samples ranged from 0.1 to 0.3% over a period of three days with mercury additions of 10 ng L⁻¹. A detection limit of 0.05% for Me¹⁹⁷Hg production from ¹⁹⁷Hg²⁺ spike was obtained in seawater in a 25 h incubation experiment with mercury additions of 12 ng L⁻¹.

Keywords: Methylation of Hg; Reduction of Hg; Radiotracer ¹⁹⁷Hg; Stable isotope ¹⁹⁶Hg; Sediments; Water

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting mineral composition (Ca, K, P, Fe, Mn, Na, Zn), protein and moisture in alfalfa by I. González-Martín; J. M. Hernández-Hierro; J. M. González-Cabrera (pp. 2199-2205).

In the present work we study the use of near-infrared spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for the analysis of major (Ca, K, P) and minor (Fe, Mn, Na, Zn) elements, protein and moisture in alfalfa. The method allows immediate analysis of the alfalfa without prior sample treatment or destruction through direct application of the fibre-optic probe on ground samples in the case of the mineral composition and on-ground and compacted (baled) samples in the case of protein and humidity. The regression method employed was modified partial least-squares (MPLS). The calibration results obtained using samples of alfalfa allowed the determination of Ca, K, P, Fe, Mn, Na and Zn, with a standard error of prediction (SEP(C)) and a correlation coefficient (RSQ) expressed in mg/kg of alfalfa of 1.37 × 10³ and 0.878 for Ca, 1.10 × 10³ and 0.899 for K, 227 and 0.909 for P, 103 and 0.948 for Fe, 5.1 and 0.843 for Mn, 86.2 and 0.979 for Na, and of 1.9 and 0.853 for Zn, respectively. The SEP(C) and RSQ values (in %) for protein and moisture in ground samples were 0.548 and 0.871 and 0.150 and 0.981, respectively; while in the compacted samples they were 0.564 and 0.826 and 0.262 and 0.935, respectively. The prediction capacity of the model and the robustness of the method were checked in the external validation in alfalfa samples of unknown composition, and the results confirmed the suitability of the method.

Keywords: Mineral composition; Protein; Moisture; Near infrared spectroscopy; Fibre-optic probe; Alfalfa

Comparison of different extraction methods for the determination of essential oils and related compounds from aromatic plants and optimization of solid-phase microextraction/gas chromatography by Jana Richter; Ingo Schellenberg (pp. 2207-2217).

Different extraction methods for the subsequent gas chromatographic determination of the composition of essential oils and related compounds from marjoram (Origanum majorana L.), caraway (Carum carvi L.), sage (Salvia officinalis L.), and thyme (Thymus vulgaris L.) have been compared. The comparison was also discussed with regard to transformation processes of genuine compounds, particularly in terms of expenditure of time. Hydrodistillation is the method of choice for the determination of the essential oil content of plants. For investigating the composition of genuine essential oils and related, aroma-active compounds, hydrodistillation is not very useful, because of discrimination and transformation processes due to high temperatures and acidic conditions. With cold solvent extraction, accelerated solvent extraction, and supercritical fluid extraction, discrimination of high and non-volatile aroma-active components as well as transformation processes can be diminished, but non-aroma-active fats, waxes, or pigments are often extracted, too. As solid-phase microextraction is a solvent-free fully automizable sample preparation technique, this was the most sparing to sensitive components and the most time-saving method for the rapid determination of the aroma compounds composition in marjoram, caraway, sage, and thyme. Finally, solid-phase microextraction could be successfully optimized for the extraction of the aroma components from the plants for their subsequent gas chromatographic determination.

Keywords: Extraction; SPME; GC; Origanum majorana L.; Thymus vulgaris L.; Salvia officinalis L.; Carum carvi L.

Determination of five nitrobenzoic acids in groundwater by solid-phase extraction and liquid chromatography–mass spectrometry by Wai-Tang Ma; Wan Chan; Klaus Steinbach; Zongwei Cai (pp. 2219-2225).

A method involving solid-phase extraction (SPE) and reversed-phase liquid chromatography–mass spectrometry (LC–MS) has been developed for determination, in groundwater, of nitrobenzoic acids associated with 2,4,6-trinitrotoluene production. Pre-concentration on a co-polymer-based SPE cartridge enabled quantitative extraction of the analytes from water. Investigation of negative ion electrospray and atmospheric-pressure chemical ionization mass spectrometry indicated the sensitivity of APCI was more than twice that of ESI. An ¹⁵N-labeled internal standard was used to achieve more accurate quantitation and mass assignment. Recovery was better than 80% when 10 mL water was extracted with the SPE cartridge. Combination of SPE with LC–MS analysis resulted in method detection limits of less than 5 μg L⁻¹. The method has been used for analysis of groundwater samples collected from a site of a former ammunition plant. Contamination with nitrobenzoic acids was determined at μg L⁻¹ levels.

Keywords: Nitrobenzoic acids; Solid-phase extraction; Groundwater; Trinitrotoluene

Preparation of Fe₃O₄-C18 nano-magnetic composite materials and their cleanup properties for organophosphorous pesticides by Hao-Yu Shen; Yong Zhu; Xia-Er Wen; Yu-Miao Zhuang (pp. 2227-2237).

Magnetic Fe₃O₄-C18 composite nanoparticles of approximately 5–10 nm in size were synthesized and characterized by IR spectroscopy, atomic absorption spectroscopy, X-ray diffraction, and transmission electron microscopy. The magnetic Fe₃O₄-C18 composite nanoparticles were applied for cleanup and enrichment of organophosphorous pesticides. Comparative studies were carried out between magnetic Fe₃O₄-C18 composite nanoparticles and common C18 materials. Residues of organophosphorous pesticides were determined by gas chromatography in combination with a nitrogen/phosphorus detector. The cleanup and enrichment properties of magnetic Fe₃O₄-C18 composite nanoparticles are comparable with those of common C18 materials for enrichment of organophosphorous pesticides, but the cleanup and enrichment are faster and easier to perform. Figure Presumed mechanism for the adhesion of the OPs to the Fe₃O₄-C18 magnetic nanoparticles

Keywords: Magnetic Fe₃O₄-C18 composite nanoparticles; Organophosphorous pesticides; Cleanup and enrichment; Gas chromatography in combination with a nitrogen/phosphorus detector

Use of the diffusive gradients in thin films technique to evaluate (bio)available trace metal concentrations in river water by Pavel Diviš; Hana Dočekalová; Lukáš Brulík; Marek Pavliš; Petr Hekera (pp. 2239-2244).

Concentrations of Cd, Cu, Cr, Pb, Ni and Zn were monitored in the Svitava River (the Czech Republic) during April and September 2005. Total concentrations and total dissolved concentrations were obtained through regular water sampling, and the diffusive gradients in thin films technique (DGT) were used to gain information on the kinetically labile metal concentrations. Each measured concentration was compared with the corresponding average (bio)available concentration calculated from the mass of metal accumulated by the moss species Fontinalis antipyretica. The concentrations of Cd, Pb, Cr and Zn measured using DGT corresponded well with those obtained after the deployment of Fontinalis antipyretica moss bags in the Svitava River, but the concentrations of Cu and Ni did not. The calculated (bio)available Cu concentration correlated well with the total dissolved concentration of Cu, whereas no correlation was found to exist between the concentrations of Ni. Scheme of the Svitava River monitoring station, including the DGT sampling units and Fontinalis antipyretica moss bags

Keywords: Diffusive gradients in thin films technique; Bioavailabilty; Trace metals; Svitava River

Determination of triazine herbicides: development of an electroanalytical method utilizing a solid amalgam electrode that minimizes toxic waste residues, and a comparative study between voltammetric and chromatographic techniques by Djenaine De Souza; Renata A. de Toledo; Andressa Galli; Giancarlo R. Salazar-Banda; Maria R. C. Silva; Gustavo S. Garbellini; Luiz H. Mazo; Luis A. Avaca; Sergio A. S. Machado (pp. 2245-2253).

The use of a copper solid amalgam electrode (CuSAE) for the analytical determination of triazine herbicides (atrazine and ametryne) instead of the conventional hanging mercury drop electrode (HMDE) is reported. The results obtained using electroanalytical methods utilizing each of these electrodes were also compared with those provided by the HPLC technique. The results indicated that the CuSAE electrode can be used to detect the herbicides studied, since the detection limits reached using the electrode (3.06 μg L⁻¹ and 3.78 μg L⁻¹ for atrazine and ametryne, respectively) are lower than the maximum values permitted by CONAMA (Brazilian National Council for the Environment) for wastewaters (50 μg L⁻¹) and by the US EPA (Environmental Protection Agency of the United States) in natural water samples (10.00 μg L⁻¹). An electroanalytical methodology employing CuSAE and square wave voltammetry (SWV) was successfully applied to the determination of atrazine and ametryne in natural water samples, yielding good recoveries (70.30%–79.40%). This indicates that the CuSAE provides a convenient substitute for the HMDE, particularly since the CuSAE minimizes the toxic waste residues produced by the use of mercury in HDME-based analyses.

Keywords: Copper solid amalgam electrode; Atrazine; Ametryne; Mercury electrodes

Raman spectroscopic analysis of the enigmatic Comper pigments by Howell G. M. Edwards; Rosalind Wolstenholme; David S. Wilkinson; Christopher Brooke; Michelle Pepper (pp. 2255-2262).

An early church decoration project carried out by Sir Ninian Comper in 1896–98, involving the rood screen and canopy in St. Mary’s, Egmanton, is currently undergoing restoration. Despite the rather prolific works of this famous ecclesiastical architect, there is little information available about the actual pigments that he used in his projects that gave rise to the special nomenclature “Comper green” and “Comper red”. Specimens of green, red, black, grey, white and blue paint from this work have been made available for Raman spectroscopic analysis, and their identification has been achieved for the first time. The characteristic red and green pigments used in Comper’s work, Comper green and Comper red, are both seen to be mixtures; in the former, Raman bands from chrome yellow (lead(II) chromate) and Prussian blue are identified, and the latter is confirmed as being a mixture of vermilion (mercury(II) sulfide) and barytes (barium sulfate). The other colours are found to represent a rich diversity of palette and include haematite, lead tin yellow (type II), lamp black, gypsum, anhydrite, hydrocerussite and calcite. The information from this first Raman spectroscopic study of Comper’s palette will assist the conservation and restoration of an important nineteenth century church decoration.

Keywords: Raman spectroscopy; Comper; Pigments; Comper red; Comper green; Ecclesiastical decoration

Dissolution of cellulose in ionic liquids as a way to obtain test materials for metal-ion detection by Vladimir M. Egorov; Svetlana V. Smirnova; Andrey A. Formanovsky; Igor V. Pletnev; Yury A. Zolotov (pp. 2263-2269).

Cellulose films containing entrapped analytical reagents suitable for metal-ion detection are produced by joint dissolution of cellulose and the reagents in ionic liquids then precipitation with water. The conditions of preparation of these test materials have been optimized and their properties have been studied. The film obtained by use of the ionic liquid 1-butyl-3-methylimidazolium chloride and 1-(2-pyridylazo)-2-naphthol has been used for colorimetric determination of divalent zinc, manganese, and nickel with detection limits at the 10⁻⁶ mol L⁻¹ level.

Keywords: Metals/Heavy metals; Preconcentration; Thin films; Water

Micellar solid-phase microextraction for determining partition coefficients of substituted polycyclic aromatic hydrocarbons in micellar media: possible prediction of hydrocarbon–micelle behaviour by Verónica Pino; Ana M. Afonso; Juan H. Ayala; Venerando González (pp. 2271-2281).

Micellar solid-phase microextraction (MSPME) coupled to gas chromatography-mass spectrometry (GC-MS) has been used to obtain partition coefficients of a group of 18 substituted aromatic hydrocarbons to ionic and nonionic micelles. Statistical and factor analyses have been utilized to establish some general equations relating molecular descriptors of non-substituted polycyclic aromatic hydrocarbons and their partition coefficients obtained by MSPME. The obtained equations have correlation coefficients higher than 0.94. They are used to predict hydrocarbon–micelle partition coefficients for a group of hydrocarbons with reported literature values giving a correlation coefficient of 0.98 and a standard deviation of the prediction of 0.182. The predictive model was also applied to substituted polycyclic aromatic hydrocarbons with partition coefficient values obtained by MSPME, with a 69% level of success.

Keywords: Solid-phase microextraction; Micellar media; Partition coefficients; Gas chromatography-mass spectrometry; Polycyclic aromatic hydrocarbons

Kinetic migration studies using Porapak as solid-food simulant to assess the safety of paper and board as food-packaging materials by C. Nerín; E. Contín; E. Asensio (pp. 2283-2288).

Porapak has been studied as a solid-food simulant in experiments on paper and board packaging. Three samples of paper with different recycled pulp content and surface treatment, and of different grammage and thickness, were used for the studies. Kinetic behaviour from 25 °C to 100 °C and different contact times ranging from 5 min at 100 °C to 10 days at 25 °C were studied using Porapak or, occasionally, Tenax or milk powder. Similar results were obtained with Porapak and Tenax but those from Porapak were more stable with temperature. Porapak behaves as good solid-food simulant even at high temperature.

Keywords: Food packaging; Solid-food simulants; Kinetic migration studies; Recycled pulp

A feasibility study on the use of visible and short wavelengths in the near-infrared region for the non-destructive measurement of wine composition by D. Cozzolino; M. J. Kwiatkowski; E. J. Waters; M. Gishen (pp. 2289-2295).

The aim of this study was to explore the capability of spectroscopy in the visible (Vis) and short wavelength near-infrared (NIR) regions for the non-destructive measurement of wine composition in intact bottles. In this study we analysed a wide range of commercial wines obtained in Australia in different types of bottles (e.g. colours, diameters and heights), including different wine styles and varieties. Wine bottles were scanned in the Vis-NIR region (600–1,100 nm) in a monochromator instrument in transflectance mode. Principal component analysis (PCA) and partial least-squares (PLS) regression were used to interpret the spectra and develop calibrations for wine composition. Due to the relatively small number of samples available full cross-validation (leave-one-out) was used as validation. The coefficient of correlation in calibration $$left( {R_{{ ext{cal}}}^2 } ight)$$ and the standard error of cross-validation (SECV) were 0.67 (SECV: 0.48%), 0.83 (SECV: 4.01 mg L⁻¹), 0.70 (SECV: 28.6 mg L⁻¹) and 0.50 (SECV: 0.15) for alcohol content, total SO₂, free SO₂ and pH, respectively, in the set of wine samples analysed. These preliminary results showed that the assessment of wine composition by Vis and short wavelengths in the NIR is possible for either qualitative analysis (e.g. low-, medium- and high-quality grading), or for screening of composition during bottling and storage. Although low accuracy and precision were obtained for the chemical parameters routinely analysed in wine, calibration models for the chemical parameters were considered acceptable for screening purposes in terms of the standard errors obtained.

Keywords: Near-infrared spectroscopy; Principal component analysis; Short wavelengths; Wine composition; Bottles; Glass; Non-destructive analysis; Chemometrics

Fluorescent sensing layer for the determination of L-malic acid in wine by Félix Gallarta; Francisco Javier Sáinz; Cecilia Sáenz (pp. 2297-2305).

An enzymatic method for determining L-malic acid in wine based on an L-malate sensing layer with nicotinamide adenine dinucleotide (NAD⁺), L-malate dehydrogenase (L-MDH) and diaphorase (DI), immobilized by sol-gel technology, was constructed and evaluated. The sol-gel glass was prepared with tetramethoxysilane (TMOS), water and HCl. L-MDH catalyzes the reaction between L-malate and NAD⁺, producing NADH, whose fluorescence (λ _exc = 340 nm, λ _em = 430 nm) could be directly related to the amount of L-malate. NADH is converted to NAD⁺ by applying hexacyanoferrate(III) as oxidant in the presence of DI. Some parameters affecting sol-gel encapsulation and the pH of the enzymatic reaction were studied. The sensing layer has a dynamic range of 0.1–1.0 g/L of L-malate and a long-term storage stability of 25 days. It exhibits acceptable reproducibility [s _r(%)≈10] and allows six regenerations. The content of L-malic acid was determined for different types of wine, and polyvinylpolypyrrolidone (PVPP) was used as a bleaching agent with red wine. The results obtained for the wine samples using the sensing layer are comparable to those obtained from a reference method based on UV-vis molecular absorption spectrometry, if the matrix effect is corrected for.

Keywords: Sensing layer; L-Malate dehydrogenase; Sol-gel; L-Malate; Wines

A rapid fractionation method for heavy metals in soil by continuous-flow sequential extraction assisted by focused microwaves by Tetsuya Nakazato; Mikio Akasaka; Hiroaki Tao (pp. 2307-2307).

Sections

Personal tools

Analytical and Bioanalytical Chemistry (v.387, #6)

Sections

Personal tools

Local resources

Analytical and Bioanalytical Chemistry (v.387, #6)